Our Top 10 Recommendations for Wen Planers

Up-to-date pricing and reviews for Wen planers on the market

SaleBestseller No. 1

Onboard material removal gauge informs users about the cutting depth of each pass
Plane boards up to 6 in. T and 13 in. W
15 Amp motor generates 25,500 cuts per minute at a 26 ft. per minute feed rate
3-blade design makes easy work out of even the hardest of woods
Fan-assisted dust port removes sawdust from workpiece

Bestseller No. 2

6-amp motor provides up to 34,000 cuts per minute
16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches
Make rabbets up to 7/10 inch in size with the included rabbeting guide
Lightweight design weighs in at a mere 6 pounds. Motor:120 V, 60 Hz
Includes power planer, dust bag, a kickstand, a parallel fence bracket and a 2-year warranty

Bestseller No. 3

Granite table provides a sturdy non-marring surface for wood to smoothly travel over
Plane boards up to 6 inches thick and 12.5 inches wide
15A motor generates 17,000 cuts per minute at a 26 feet per minute feed rate
Adjust depth to plane off anywhere from 0 to 3/32 of an inch with each pass
Fan-assisted dust port removes sawdust from workpiece

Bestseller No. 4

15 amp benchtop thickness Planer motor allows for superior stock removal as its 8, 000 RPM cutter head speed provides 16, 000 cuts per minute. The two-knife, quick-change, solid steel cutter head assures smooth operation and long life. Ideal for dimensioning lumber to a desired thickness, and even planes glued-up materials.
Hard and soft wood material removal: 15 amp motor provides power for both hard and soft wood material removal
Maximum stock removal: Poly-V Cutterhead drive for maximum stock removal
Smooth operation: Two knife, quick change, solid steel cutter, head mounted on ball bearings, assures smooth operation and long life
Longer cutting life: high carbon steel, double edged, Reversible knives for cutting life

Bestseller No. 5

Heavy duty cast iron base and tabletop prevent wobbling and walking during operation
Features a spacious 6-1/4 x 28-1/2-inch table and a 2-blade 6-1/8-inch cutterhead
10-amp motor generates up to 20,000 cuts per minute anywhere from 0 to 1/8 of an inch
Adjustable 20-3/4 by 4-1/2-inch cast iron fence bevels up to 45 degrees in either direction
Includes a push stick, a push block, an adjustable 2-1/2-inch dust chute, and a dust filter bag

SaleBestseller No. 6

▲【POWERFUL & EFFICIENT】7.5 Amp motor and blade drum with two double-sided blades rotate at 14500 RPM for fast stock removal and smooth finish in soft and hard woods, provides great power and efficiency; This hand planer for woodworking is so light (6 pounds) that it can minimize your fatigue for a long time working
▲【HIGH ACCURACY】Ratcheting depth knob allows fool-proof setting of depth increments from 0 inch to 1/8 inch (3 mm) within 1 revolution, eliminating the need to re-zero the depth; This electric hand planer allows you to tackle a variety of woodworking projects with maximum precision, and the tool has 3 machined grooves for chamfering
▲【DURABILITY & PROTECTION】The aluminum front and rear shoes will not deform and rust, lasts up longer than iron shoes on other wood planer, ensure parallelism of cut. And the rubber drive belt provides enhanced belt durability; Spring-loaded stand elevates tool to protect blade and tool resting spot
▲【VERSATILITY】The dual exhaust ports and switch, you can choose the left/right hand to operate the power planer, and which side to blow chips out of depending on which side you stand on the unit when working; Dual-mount guide fence and no-mar plastic overshoe mounts to either side of tool and helps ensure consistent planing through entire workpiece
▲【CUSTOMER SERVICE】If you encounter any problems during this process, please contact us by Email: [email protected], TACKLIFE Customer Service will response in 24 hours

Bestseller No. 7

Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

Bestseller No. 8

Your purchase includes One Stationary 13" Planer, in/out feed tables, extra blades and dust hose adapter. Stand is not included.
Planer dimensions: 24” L x 22” W x 18” H. Depth capacity: 6-Inch. Max depth cut: 1/8-Inch. Width capacity: 13-Inch. Tool weight: 92 pound
Specifications: Made for 110V, not convertible to 220V. Includes automatic carriage lock that reduces the movements and snipes. Not compatible with Wi-Fi or Bluetooth
Two-speed gearbox allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
Compatible with DW735 13", DW735X 13"

Bestseller No. 9

Includes a 1/2-inch keyed chuck and onboard key storage
Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
Durable 1/3 HP induction motor develops ample torque and power
6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right

Bestseller No. 10